Approx. Rs 90,000 / PieceGet Latest Price
|Design Type||Standard, Customized|
|Country of Origin||Made in India|
Ribbon Blender are widely used for homogeneous mixing of dry granules & powder.The blender consists ofhorizrontal "U"-shaped through with two sets of sprial ribbons,one inside the other.Inner and outer ribbon areperfectly arranged that during rotation,the material reaches each corner of the trough and in parts radial & linearmotion to the whole of the material to be mixed. At the same time material is moved from side of the trough to thecenter and vise versa resulting in through mixing across the entire cross section of the blender. The clearancebetween ribbons outer edge and the through wall typically range from 3 to 5 mm.The ribbon blender gives best result for mixing of dry powder & granules due to the design and shape of mixingribbon and product container. It can be used for pharmaceutical, food, chemical and cosmetic product.Material should be charge from the top side. There are port/ports should be provided on the top cover to chargethe material as well as for air vent. One discharge valve provided at the bottom side at center of the container.The discharge height could be adjust as per the requirements, so that material gets discharge in the othercontainer directly, so that material handling time for discharge is nil and the operation is dust free.In ribbon blender the powder moves from center to the end of container and end of container to the center ofcontainer.Hence requirements of total mixing time is very less and the RPM required are also very less.The drymaterial gets sufficient contineous movements due to shape & movements of ribbon & shape of the container.Which moves material for good quality of blending.